Catalogue

Custom EVA & PE Foam Inserts and Components

FFG develops EVA and PE foam inserts, transport trays, protective shells and other components around your equipment, enclosure and handling needs. Material grade, geometry, process and validation requirements are defined for each project.

Compare foam materials and specifications ↗

Products & development examples

Adapted application illustration: EVA drone foam insert with shaped recesses, a central opening and a removable block with two finger-access slots.
Development application Adapted application illustration

EVA foam block for drone transport

EVA foam block made for an 8-inch drone, with customer CAD integration and design refinement by FFG. Adaptable to any drone size, larger or smaller, and any configuration, for carrying bags, rigid protective transport cases and standalone workshop supports.

View details ↗
Adapted application illustration: oblique view of an EVA foam insert for a 6-inch drone and accessories, with connected circular recesses, rectangular pockets and a long side channel.
Development application Adapted application illustration

EVA foam insert for a 6-inch drone and accessories

EVA foam insert for a 6-inch drone and accessories: 35 Shore C, 70 kg/m³, CNC machining only. Prototype, mass-production and small-batch support.

View details ↗
Adapted application illustration: oblique view of a gray EVA compartment insert with layered sidewalls and finger-access cutouts between slots for field equipment.
Development application Adapted application illustration

EVA foam insert for field equipment protection & transport

Compartmented EVA foam for electronics, drones and tools: 35 Shore C, 70 kg/m³, glued die-cut layers and finger access. Bag and case integration.

View details ↗
Adapted application illustration: white 3D-printed prototype beside a black PE foam pilot, viewed from the outer channel face.
Development application Adapted application illustration

Foam inserts & chassis fillers

Lightweight equipment filling: a white 3D-printed prototype and a black CNC-machined PE foam pilot at 20 kg/m³. Development stopped before mass production.

View details ↗
Adapted application illustration: off-white PE foam insert with a central cavity, four channels and a triangular recess, viewed at an oblique angle.
Development application Adapted application illustration

PE foam insert for drone delivery and transport

PE foam at 20 kg/m³: FFG design review for manufacturing, material selection support, rapid CNC blade prototypes and glued die-cut layers for drone delivery and transport.

View details ↗
Adapted application illustration: white PE foam compartment tray with two circular recesses, smaller slots and partitioned compartments, viewed at an oblique angle.
Development application Adapted application illustration

Compartmented PE foam tray for drone delivery and transport

Compartmented PE foam tray at 20 kg/m³, developed with FFG DFM and material support, several CNC blade prototype rounds, and glued die-cut layers. Multiple packaging options.

View details ↗
Adapted application illustration of the male PE foam shell, shown from an interior oblique angle. The female shell is not pictured.
Development application Adapted application illustration

PE foam isolation shell for equipment

A 20 kg/m³ PE foam shell with flame-retardant treatment. FFG revised the design around a hard case closure; CNC-machined prototype and EPE production.

View details ↗
Front view of a black padded backpack back panel with nine raised sections in three columns on a light gray background.
Backpack component

Black padded backpack back panel in PE600D and EVA

Black PE600D laminated onto 10 mm EVA, thermoformed and pressed as a padded backpack back panel. Sewable or removable integration.

View details ↗
Adapted application illustration of a rounded rectangular casing with a gray fabric exterior and black interior, seen obliquely from above.
Custom casing development Adapted application illustration

Thermoformed EVA casings

Custom thermoformed EVA casings developed and manufactured as standalone components or integrated into pouches, bags and other products, including FFG Bags assemblies.

View details ↗

Start with the material

EVA foam

For projects such as thermoformed backpack panels and casings, define the EVA grade, thickness, geometry and required finish with FFG.

Discuss this material ↗

PE foam

For equipment components and other PE foam projects, share the drawing, grade or density if known, dimensions and assembly interfaces.

Discuss this material ↗

Explore an application

Field equipment protection & transport

Develop compartmented inserts for electronic equipment, drones, tools and accessories. Define finger access, bag or case integration, shock cushioning and any light thermal insulation requirements.

Discuss this application ↗

Drone protection & transport

Define the drone and accessory layout, enclosure dimensions, handling conditions and protection requirements for a foam insert or assembly.

Discuss this application ↗

Delivery boxes

Discuss a box or foam assembly for the payload, including a drone delivery project. Define the contents, closure, carrier interface and handling requirements.

Discuss this application ↗

Thermoformed EVA backpack panels

Develop the panel geometry and its connection to the backpack, with the EVA specification and forming details agreed for the project.

Discuss this application ↗

Thermoformed EVA casings

Review the casing shape, contents, closure and textile or hardware interfaces. Define the material and finished assembly together.

Discuss this application ↗

Foam inserts & chassis fillers

Explore lightweight internal filling for drones, machines, vehicles, robotic systems and industrial equipment. Define the volume to fill, permitted added mass, assembly interfaces and requirements to validate.

Discuss this application ↗

Equipment protection shells

Explore paired or sliding foam shells for sensitive equipment. Define the mating hard case, closure movement, equipment contact points and protection requirements for each project.

Discuss this application ↗

PE foam for large equipment

Discuss a PE foam component incorporated into equipment construction, using the part drawing, dimensions, tolerances and mating interfaces.

Discuss this application ↗

Build a useful enquiry

Share the part or assembly drawing, overall dimensions, material or grade if known, interfaces, quantities and timing. Include the requirements you need to validate.

Discuss your project