Development application

PE foam insert for drone delivery and transport

A PE foam insert developed for drone delivery and transportation applications, using foam at 20 kg/m³. FFG reviewed and modified the design for manufacturing, assisted material selection and supported several rounds of rapid CNC blade prototyping. The assembly uses die-cut layers glued together.

Discuss a similar application

Documented specification

Intended application
Drone delivery and transportation
Material / density
PE foam — 20 kg/m³
FFG contribution
Design review and modification for manufacturing (DFM); material selection assistance
Prototyping
CNC blade cutting through several rounds
Assembly
Die-cut foam layers glued together
Reuse
Intended for a few uses; no tested cycle count specified
Supply configurations
Insert alone, with a carton or plastic box, in a soft goods bag, or in a rigid transport case

Compare foam materials and specifications ↗

Adapted application illustration: off-white PE foam insert with a central cavity, four channels and a triangular recess, viewed at an oblique angle.
Adapted application illustrationShaped insert shown in an oblique view. The cavity and channel geometry is adapted for presentation and does not show the exact customer design.

Design review and material selection

FFG reviewed the design and modified it for manufacturability (DFM), while assisting with material selection. This example uses PE foam at 20 kg/m³. For a similar application, share the equipment geometry, container dimensions and handling requirements so FFG can review the design and material together.

Rapid prototypes through several rounds

The insert was prototyped through several rounds using CNC blade cutting. This supports quick changes between prototype rounds, allowing the design to progress iteratively. The example demonstrates FFG’s rapid prototyping capability; the timing and checks for a new project are agreed around its requirements.

Die-cut layers assembled by gluing

The foam assembly is made from die-cut layers glued together. CNC blade cutting is the confirmed prototype process, while die-cutting and gluing define the layered assembly. For a similar project, FFG can review the layer definition and manufacturing scope with you.

Supply the insert or the complete packaging

FFG can supply a foam insert on its own or with its associated carton box. Multiple insert layers can be combined in one carton when needed. Other options include a simple plastic box, a soft goods bag or a rigid transport case comparable to a Pelican-style case. This application is intended for a few uses; the number of reuse cycles and transport performance must be defined for your project. Discuss your own layout and packaging configuration with FFG.

Build a useful enquiry

Share the part or assembly drawing, overall dimensions, material or grade if known, interfaces, quantities and timing. Include the requirements you need to validate.

Discuss a similar application